Hey Michael! Remember when you said you'd need reminding to draw up plans for the Pwoolson/Brock neck angle jig? Well.....
Larry
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| MichaelP reminder!!! http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3536 |
Page 1 of 1 |
| Author: | L. Presnall [ Sat Oct 15, 2005 3:05 am ] |
| Post subject: | |
Hey Michael! Remember when you said you'd need reminding to draw up plans for the Pwoolson/Brock neck angle jig? Well.....
Larry |
|
| Author: | Brock Poling [ Sat Oct 15, 2005 3:11 am ] |
| Post subject: | |
The only credit I can take for that jig is letting the cat out of the bag and telling you about it. It is Paul's adaptation of a Charles Fox design. |
|
| Author: | Michael Dale Payne [ Mon Oct 17, 2005 12:19 am ] |
| Post subject: | |
I have to say I kinda droped the ball on that...my bad I got cought up in toomany things late this summer. I will ge on it first of next week. |
|
| Author: | Pwoolson [ Mon Oct 17, 2005 12:53 am ] |
| Post subject: | |
Hey Michael. I'm in the process of teaching myself CAD so why don't I draw it up? It will give me practice and take the burden off of you. I'll get on it right away. P |
|
| Author: | L. Presnall [ Mon Oct 17, 2005 1:00 am ] |
| Post subject: | |
3 for PW! 
|
|
| Author: | Michael Dale Payne [ Mon Oct 17, 2005 1:16 am ] |
| Post subject: | |
[QUOTE=Pwoolson] Hey Michael. I'm in the process of teaching myself CAD so why don't I draw it up? It will give me practice and take the burden off of you. I'll get on it right away. P[/QUOTE] Ok Paul. So Autocad or what? |
|
| Author: | Pwoolson [ Mon Oct 17, 2005 1:18 am ] |
| Post subject: | |
Rhino 3D. I'm not sure it will give the results expected from "plans" but it will be buildable from these designs. |
|
| Author: | Michael Dale Payne [ Mon Oct 17, 2005 1:29 am ] |
| Post subject: | |
It will do fine if you can draw lines and dimension them is all tha matters! |
|
| Author: | JJ Donohue [ Mon Oct 17, 2005 1:20 pm ] |
| Post subject: | |
Bravo!!! Thanks to both of you ...I've been wanting to build this jig for some time. Looking forward to the drawing and the consistency it will provide in my next efforts. |
|
| Author: | Don A [ Mon Oct 17, 2005 1:47 pm ] |
| Post subject: | |
[QUOTE=JJ Donohue] Bravo!!! Thanks to both of you ...I've been wanting to build this jig for some time. Looking forward to the drawing and the consistency it will provide in my next efforts. [/QUOTE] That makes 2 of us  . I'd also like to see pictures of the jig in actual use.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|